MUCOFF Ultimate Tubeless Setup Kit

Description

A kit complete with every essential needed to join the tubeless revolution. Our Ultimate Tubeless Setup Kit is a one-stop shop for everything you need to make the switch with your tubeless-ready wheelset. 

Going tubeless? Our Ultimate Tubeless Setup Kit is a one-stop-shop for everything you'll need to make the switch. Just make sure you've got tubeless-ready wheels and tyres

The Muc-Off Ultimate Tubeless Kit contains everything needed to get a tubeless-ready wheelset set up and ready to roll. Each Kit contains a Muc-Off Tubeless Rim Tape, Seal Patches, 2 CNC-machined black tubeless Valves and 2 pouches of No Puncture Hassle Tubeless Sealant.

VALVE Size Guide

How to Use

Remove all old rim strips or tape and clean the rim.

Make sure the rim is clean and dry before applying the tape.

Get the tape from the packet and line it up from the opposite side of the valve.

Start by unwinding a small amount of the tape and pressing it down using your thumb or finger to hold pressure down.

Continue to hold while you pull back on the tape and stick down tight once you have a few cm on the tape will stick and holding is no longer needed.

Continue the entire way around the rim (if it has a big concave in you can pull and wiggle the tape to fill any edges)

Overlap the tape by roughly 10 – 15cm

Leave a small amount unstuck so that you can cut the remainder off

Once cut sketch and pull the tape down to create a seal

Go around the rim with your thumb to make sure there are no air pockets or messed areas.

Once you are happy with how it looks using a small pin locate the valve hole and cleanly pierce the tape ready for the valve

Grab your tubeless valve and remove the lock ring and o ring

Chose the right rubber fitment for your rim tape and insert the valve into the rim

Refit O-ring and Lockring making sure you lock the valve in (don’t go too tight or could damage the rubber)

Re-fit your tire of choice careful not to damage the tape (by using tire levers etc)

Inflate tire to create a fit (should hear some popping around the rim)

Release Air and remove valve core using the spare valve cap

Grab the sealant pouch and give it a shake

Unscrew the cap and fit on the valve in an upright position

While holding the pouch spin the wheel down so that the pouch is now upside down

Insert the sealant by rolling the pouch down

Spin wheel back upright and remove the pouch

Reinsert valve core and inflate to your pressure

What's included:

• 1x 10m roll of Tubeless Rim Tape (enough for two rims!)
• 2x Seal Patches
• 2x Black Tubeless Valves
• 2x Valve caps
• 2x Locking nuts
• 1x Valve core removal tool (doubles as a spare valve cap)
• 3 x Pairs of rubber bases for size choice
• 2x Pouches of No Puncture Hassle Tubeless Sealant

Additional Info
Country of Origin: China